Sebring Convertible V6-2.7L (2009)
Power Window Switch: Service and Repair
Power Window Switch - Installation
INSTALLATION
FRONT DOOR
1. Install the switch by snapping into place.
2. Connect switch wire connector.
3. Install the door trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim
Panel - Installation.
4. Connect the negative battery cable.
REAR DOOR
1. Install the switch to the handle.
2. Connect the electrical connector.
3. Install the interior door handle. .
4. Connect the negative battery cable.