Sebring Convertible V6-2.7L (2009)
11. Install crossmember to vehicle. Tighten bolts (1) to 50 Nm (37 ft. lbs.).
12. Install lower engine anti-roll mount bolt (2) and tighten bolt to 47 Nm (35 ft. lbs.).
13. Install crossmember bolts (1) and tighten bolts to 55 Nm (40.5 ft. lbs.).
14. Install mount through bolt (1) and tighten to 47 Nm (35 ft. lbs.).
15. Connect negative battery cable, tighten nut to 4.5 Nm (40 in. lbs.).
