Sebring Convertible V6-2.7L (2009)
Front Steering Knuckle: Service and Repair
Front Steering Knuckle - Removal
REMOVAL
NOTE: Before proceeding, review all Warnings and Cautions. See: Suspension/Service Precautions/Technician Safety Information
1. Raise and support the vehicle. See: Maintenance
2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).
NOTE: The hub nut is a single use type. A new nut is required for reassembly. Do not reuse the hub nut.
3. While a helper applies the brakes to keep the hub from rotating, remove the hub nut (1) from the axle half shaft (2).
4. Access and remove the front brake rotor. See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Removal
