Sebring Convertible V6-2.7L (2009)
12. Install a NEW power steering pump drive belt. See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive
Belt/Service and Repair/Removal and Replacement/Serpentine Accessory Drive Belt - Installation
13. Install the drive belt splash shield.
14. Clean all foreign matter from the threads of the half shaft outer C/V joint.
15. Install the hub nut (1) on the end of the half shaft (2) and snug it.
16. While a helper applies the brakes to keep the hub from rotating, tighten the hub nut (3) to 132 Nm (97 ft. lbs.).
17. Install the tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation.
Install and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
18. Lower the vehicle.