Sebring Convertible V6-2.7L (2009)
5. Remove the routing clip (1) securing wheel speed sensor cable to the knuckle (4).
6. Remove the screw (2) fastening the wheel speed sensor head (3) to the knuckle (4). Pull the sensor head out of the knuckle.
7. Remove the nut (4) attaching the lower ball joint to the lower control arm (5).
8. Release the lower ball joint (5) from the lower control arm (1) using Remover (2), Special Tool 9360. Do not lift the knuckle out of the lower
control arm at this time.
