Sebring Convertible V6-2.7L (2009)
Suspension Spring ( Coil / Leaf ): Removal and Replacement
Front Suspension Strut Assembly - Removal
REMOVAL
NOTE: Before proceeding, See: Service Precautions/Technician Safety Information .
1. Raise and support the vehicle. See: Maintenance
2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).
NOTE: If both strut assemblies are to be removed, mark the strut assemblies right or left and keep the parts separated to avoid mix-up. Not
all parts of the strut assembly are interchangeable side-to-side.
3. Remove the screw (1) securing the flex hose (2) routing bracket to the strut (6).
