Sebring Convertible V6-2.7L (2009)
6. If equipped with rear disc brakes, remove the two bolts (1) securing disc brake caliper adapter (3) to the brake support plate (4).
7. If equipped with rear disc brakes, remove the disc brake caliper (2) and adapter (3) as an assembly. Hang the assembly out of the way using wire
or a bungee cord. Use care not to overextend the brake hose and tubing when doing this.
8. Remove the brake rotor or brake drum, then the hub and bearing. See: Wheel Bearing/Service and Repair/Rear Hub and Bearing - Removal
9. Remove the parking brake cable from the lever on the brake shoe.
10. Remove the hair pin (1) securing the parking brake cable (2) to the brake support plate (3).
11. Slide the brake support plate (3) with brake shoes off the end of the parking brake cable (2).
12. Pull the parking brake cable from the trailing link.
