Sebring Convertible V6-2.7L (2009)
13. Install tire and wheel assembly (1) See: Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation. Install
and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
14. Lower the vehicle.
15. Position the vehicle on an alignment rack/drive-on lift. Raise the vehicle as necessary to access yet to be tightened mounting bolts.
16. Tighten the two mounting bolts fastening the leading end of the trailing link (3) to the body (1) to 110 Nm (81 ft. lbs.).
17. Perform wheel alignment as necessary. See: Alignment/Service and Repair
