Sebring Convertible V6-2.7L (2009)
Pressure Regulating Solenoid: Service and Repair
41TE Automatic Transaxle
Transmission Solenoid and Pressure Switch Assembly - Removal
REMOVAL
NOTE: If solenoid/pressure switch assembly is being replaced, the "Quick-Learn" procedure must be performed See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Programming and Relearning/Powertrain Control Module -
Programming/Quick Learn Procedure .
1. Disconnect battery negative cable.
2. Remove air cleaner assembly.
3. Disconnect solenoid/pressure switch assembly connector (1).
4. Disconnect input speed sensor connector (2).
