Sebring Convertible V6-2.7L (2009)
3. Install the valve body oil pan, use a bead of MOPAR(R) ATF RTV (MS-GF41).
4. Install the upper valve body oil pan bolts and tighten to 6 Nm (50 in. lbs.).
5. Install the pressure tap at valve body oil pan and tighten to 6 Nm (50 in. lbs.).
6. Lower the vehicle on a hoist.
7. Install the solenoid pack connector (2) at valve body oil pan.
8. Raise the vehicle on the hoist.
