Sebring Convertible V6-2.7L (2009)
1. Remove the valve body from the transmission See: Valve Body/Service and Repair/Removal and Replacement/41TE Automatic Transaxle/Valve
Body - Removal.
2. Remove the electrical connectors from the pressure control solenoid (1) and the line pressure sensor (2).
3. Remove the screws (6) holding the pressure control solenoid (1) and line pressure sensor (2) to the valve body.
4. Remove the pressure control solenoid and line pressure sensor from the valve body.
Variable Line Pressure Sensor - Installation
INSTALLATION
