Sebring Convertible V6-2.7L (2009)
Transmission Position Switch/Sensor: Service and Repair
41TE Automatic Transaxle
Transmission Range Sensor - Removal
REMOVAL
1. Remove valve body assembly from transaxle. See: Automatic Transmission/Transaxle/Valve Body/Service and Repair/Removal and
Replacement/41TE Automatic Transaxle/Valve Body - Removal.
2. Remove Transmission Range Sensor retaining screw (3) and remove sensor (1) from valve body.
3. Remove TRS (1) from manual shaft.
Transmission Range Sensor - Installation
INSTALLATION
1. Install Transmission Range Sensor (TRS) (1) to the valve body and torque retaining screw (3) to 5 Nm (45 in. lbs.).
