chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Campaign - Convertible Top Micro Switch/Software Update|Page 12478 > < Campaign - Convertible Top Micro Switch/Software Update|Page 12476
Page 5
background image

q.

Verify that the part number changed at the top of the "PTCM" screen.

r.

After completing the PTCM reprogramming, clear all Diagnostic Trouble Codes (DTC's) using the following procedure:

1.

Starting at the "Home" screen, select "System View".

2.

Select "All DTC's".

3.

Select "Clear All Stored DTC's" and follow the on-screen instructions.

4.

Select "YES" in the pop-up box.

5.

Start the engine and verify that there are no DTC's.

s.

Turn off and remove the battery charger.

2.

Install a luggage compartment warning tag using the following procedure:

a.

Open the deck lid.

b.

Locate the existing hole under the deck lid weather seal (Figure 1).

c.

Using the supplied push pin, install the luggage compartment warning tag as shown in Figure 1.

3.

Fold the cargo shield forward against the bulkhead.

4.

Remove the floor carpet panel from the vehicle trunk.

5.

Loosen the two (2) left side cargo shield bracket attachment nuts.

Campaign - Convertible Top Micro Switch/Software Update|Page 12478 > < Campaign - Convertible Top Micro Switch/Software Update|Page 12476