Sebring Convertible V6-2.7L Flex Fuel (2008)
Convertible Top Switch: Service and Repair
Power Top Control Switch - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Using a suitable flat bladed tool, pry up on the bottom side of the switch bezel (3).
3. Disconnect the power top switch electrical connector (1).
4. Disconnect the decklid release electrical connector (2) - if equipped.
5. Using a suitable flat bladed tool, release the power top switch retaining tabs (4) and separate the switch from the switch bezel (3).
