Sebring Convertible V6-2.7L VIN R (2003)
4. Install the screws attaching the trim to the door sills.
5. Install scuff plates.
6. Engage clips attaching seat belt access panel to lower B-pillar trim.
7. Install upper B-pillar trim.
B-Pillar Upper Trim
UPPER B - PILLAR TRIM
REMOVAL
1. Remove the door opening weatherstrips.
2. Pry shoulder belt knob straight off height adjuster using a trim stick (C-4755).
3. Remove seat belt turning loop cover.
4. Remove bolt attaching turning loop to height adjuster.
5. Remove bolt attaching seat belt lower anchor to floor.
6. Disengage clips attaching upper B-pillar trim to B-pillar.
Fig. 1
7. Remove upper B-pillar trim from vehicle (Fig. 1).
INSTALLATION
1. Place upper B-pillar trim into position.
2. Engage clips attaching upper B-pillar trim to B-pillar.
3. Install bolt attaching seat belt lower anchor to floor.
4. Install bolt attaching turning loop to height adjuster.
5. Install seat belt turning loop cover.
6. Push shoulder belt knob straight on height adjuster.
7. Install the door opening weatherstrips.
Quarter Panel Trim
QUARTER TRIM PANEL
REMOVAL