Sebring Convertible V6-2.7L VIN R (2003)
1. Install new L foam starting at upper screw on A-pillar retainer.
Fig. 14
2. Install new L foam starting at upper screw on A-pillar retainer (Fig. 14).
3. Position header and A-pillar weatherstrip on vehicle.
4. Secure weatherstrip into retainers at header and A-pillar.
5. Install nuts at upper corners of windshield.
6. Install push in fasteners at lower corners of windshield.
7. Install door sill trim panels.
8. Install header trim panel.
9. Install sun visors.
10. Install inside rear view mirror.
11. Lower and secure convertible top.
