Sebring Convertible V6-2.7L VIN R (2003)
2. Before installing timing cover gasket apply a 1/8 inch bead of Mopar Engine RTV GEN II to the parting lines between the oil pan and cylinder
block (Fig. 111).
3. Install timing cover and gasket. Tighten M10 cover bolts to 54 Nm (40 ft. lbs.) and M6 bolts to 12 Nm (105 in. lbs.) (Fig. 110).
4. Install front crankshaft oil seal using Special Tool 6780-2 sleeve and 6780-1 installer.
5. Lower vehicle.
6. Install right engine mount.
7. Install screws attaching heater supply tube to right front frame rail area.
8. Raise vehicle on hoist.
9. Connect heater hose to supply tube at right front frame rail area.
10. Install AC/Generator belt tensioner/bracket assembly.
11. Install crankshaft vibration damper.
12. Install accessory drive belts.
13. Install belt splash shield and right front wheel.
14. Lower vehicle.
15. Install coolant pressure container.
16. Fill cooling system.
17. Connect negative battery cable.
