Sebring Convertible V6-27L VIN R (2003) Turn Signal Lamp Diagrams
Turn Signal Lamp: Service and Repair
PARK/TURN SIGNAL LAMP
REMOVAL
1. Disconnect and isolate battery negative cable.
2. Remove headlamp retaining screws.
3. Remove headlamp to expose back of unit.
4. Rotate socket counterclockwise one quarter turn.
Park And Turn Signal Lamp Bulb
5. Pull socket from back of lamp.
6. Pull bulb from socket.
INSTALLATION
1. Push bulb into socket.
2. Twist socket into headlamp.
3. Install headlamp retaining screws.
4. Connect battery negative cable.