Sebring Convertible V6-2.7L VIN R (2003)
Variable Induction Control Valve: Service and Repair
REMOVAL - 2.7L
1. Disconnect negative battery cable.
Fig.21 Manifold Tuning Valve
2. Disconnect electrical connector (Fig. 21).
Fig.22 Manifold Tuning Valve Removal/Intallation
3. Remove manifold tuning valve mounting screws. Remove tuning valve (Fig. 22).
INSTALLATION - 2.7L
1. Install tuning valve. Tighten mounting screws to 11.9 Nm (105 in. lbs.) torque.
2. Install electrical connector.
3. Connect negative battery cable.
