Sebring Convertible V6-2.7L VIN R (2003)
11. Remove nut and bolt attaching rear of lower control arm to front suspension crossmember (Fig. 26).
12. Remove nut and bolt attaching the front of lower control arm to front suspension crossmember (Fig. 27).
CAUTION: When removing lower control arm from crossmember care must be taken to prevent hitting lower ball joint seal against steering knuckle,
causing damage to the ball joint seal.
13. Remove front of lower control arm from suspension crossmember first, then remove rear of lower control arm from suspension crossmember.
When removing rear of lower control arm from crossmember, keep control arm as level as possible. This will keep rear bushing from binding on
crossmember making it easier to remove control arm from crossmember.
