Sebring Convertible V6-3.5L (2009)
3. Remove the 12 belly pan fasteners (1) and remove the belly pan (2).
4. Remove the front cross under pipe bolts.
5. Disconnect and remove the front lower maniverter oxygen sensor.
6. Loosen the oil level indicator tube retaining bolt and position the dipstick out of the way.
7. Disconnect and remove the front upper maniverter oxygen sensor.
8. Remove the maniverter retaining bolts and maniverter.
Rear Exhaust Manifold
REMOVAL
1. Disconnect the negative battery cable.
2. Raise and support the vehicle.
