chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Air Bag(s) Arming and Disarming|Service Precautions|Page 813 > < Brake Bleeding|Specifications|Page 809
Page 1
background image

Air Bag(s) Arming and Disarming: Service Precautions

SRS SERVICE PRECAUTIONS

WARNING:

-

In order to avoid injury to yourself or others from accidental deployment of the air bag during servicing, read and carefully follow all the
precautions and procedures described.

-

After disconnecting the battery cable, wait 60 seconds or more before proceeding with the following work. The SRS system is designed to
retain enough voltage to deploy the air bag for a short time even after the battery has been disconnected, so serious injury may result
from unintended air bag deployment if work is done on the SRS system immediately after the battery cables are disconnected.

-

Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.

-

Do not use any electrical test equipment on or near the SRS components, except those specified.

-

Never Attempt to Repair the Following Components: SRS-ECU, Clock Spring, Air Bag Module. If any of these components are
diagnosed as faulty, they should only be replaced, in accordance with the INDIVIDUAL COMPONENT SERVICE procedures.

SRS-ECU Terminal Part 1

Air Bag(s) Arming and Disarming|Service Precautions|Page 813 > < Brake Bleeding|Specifications|Page 809