Sebring Coupe V6-3.0L VIN H (2005)
9. Wait for at least five minutes, then check that the auto tensioner pushrod extends within the standard value range.
Standard value (A): 3.8 - 5-0 mm (0.15 - 0.20 in.)
10. If not, repeat the operation in steps (5) to (9) above.
11. Check again that the timing marks of the sprockets are aligned.
>>C<< ENGINE SUPPORT BRACKET, RIGHT INSTALLATION
Tighten the right engine support bracket mounting bolts in the order shown in the illustration.
>>D<< CRANKSHAFT PULLEY INSTALLATION
Use special tools MB990767 and MD998715 to install the crankshaft pulley.
INSPECTION
AUTO-TENSIONER
^
Check the auto-tensioner for possible leaks.
^
Check the pushrod for cracks.