Sebring Coupe V6-3.0L VIN H (2005)
2. Press fit needle roller bearing with special tools MB990938 and MB991202.
>>C<< OIL SEAL/O-RING INSTALLATION
1. Apply a coating of DIAMOND ATF to the outside of the oil seal and O-ring.
2. Use special tool MB990927 to press fit oil seal until it touches rack bush end.
>>D<< RACK INSTALLATION
CAUTION: Do not close the vent hole in the rack with grease.
1. Apply a coating of MOPAR Multi-mileage Lubrication Part No. 2525035 or equivalent to the rack teeth face.
2. Cover rack serrations with special tool MB991213.
3. Apply DIAMOND ATF to special tool MB991213.
4. Align the center of the oil seal with the rack to prevent the retainer spring from slipping. Slowly insert the rack from power cylinder side.
>>E<< RACK BUSHING INSTALLATION
CAUTION: Do not allow oil seal retainer spring to slip out.
Wrap the rack end with vinyl tape, apply a coating of DIAMOND ATF, and then install the rack bushing and rack stopper.
>>F<< CIRCLIP INSTALLATION
