Sebring LX Convertible L4-2.4L VIN X (2002)
Speaker: Service and Repair
Instrument Panel Speaker Replacement
REMOVAL
1. Disconnect and isolate battery negative cable.
2. Remove A-pillar trim.
3. Remove instrument panel top pad.
4. Remove speaker screws.
5. Disconnect wire harness connector from speaker.
Fig.8 Dash Speaker
6. Remove speaker.
INSTALLATION
1. Connect wire harness connector to speaker.
2. Install speaker screws. Tighten to 3 Nm (30 in. lbs.).
3. Install instrument panel top cover.
4. Install A-pillar trim.
5. Connect battery negative cable.
