Sebring LX Convertible L4-2.4L VIN X (2002)
10. Install instrument panel cluster hood.
11. Install floor console.
Floor Console
FLOOR CONSOLE
REMOVAL
1. Raise parking brake lever as high as possible.
2. Move transmission shifter to neutral position.
3. Loosen set screw on front of shifter knob and remove shift lever knob.
NOTE: Do not use a trim stick or tool to remove transmission range indicator.
Fig. 11
4. Remove transmission range indicator bezel by squeezing the sides slightly and lifting up until the locking tabs are free of the floor console. Refer
to (Fig. 11) for pressure points.
5. Disconnect transmission range indicator bezel wire connector on the underside of bezel.
Fig. 12