Sebring LX Convertible L4-2.4L VIN X (2002)
Fig. 26
3. Separate weatherstrip from vehicle (Fig. 26).
INSTALLATION
FRONT
1. Position weatherstrip on vehicle.
2. Install push in fasteners into retainer channel, aligning embossment on back side of weatherstrip to corner of retainer.
3. Lower convertible top.
4. Secure convertible top.
CENTER
1. Position weatherstrip on vehicle.
2. Install push in fasteners into retainer channel, aligning embossment on back side of weatherstrip to corner of retainer.
3. Lower convertible top.
4. Secure convertible top.
REAR
1. Position weatherstrip on vehicle.
2. Install push in fasteners into retainer channel, aligning embossment on back side of weatherstrip to corner of retainer.
3. Push weatherstrip into retainer channel, aligning embossment on backside of weatherstrip to corner of retainer.
4. Lower convertible top.
5. Secure convertible top.