Sebring LX Convertible L4-2.4L VIN X (2002)
Fig. 4 Seat Switch Electrical Connector
5. Using a voltmeter, connect the ground lead to PIN B of the switch harness connector. Connect the positive lead to PIN A. If battery voltage is
present, the ground and voltage circuits to the power seat switch are OK. Check the power seat switch for proper operation (Refer to
ELECTRICAL/POWER SEATS/DRIVER SEAT SWITCH - DIAGNOSIS AND TESTING). If the seat switch checks out OK, remove the seat
assembly and check the circuits from the power seat switch to the power seat track adjuster motors for proper continuity. If the circuits appear to
be OK, replace the power seat track and adjuster motors as an assembly.
