Sebring LX Convertible L4-2.4L VIN X (2002)
Brake Caliper: Service and Repair
Removal and Installation
Front
REMOVAL - FRONT DISC BRAKE CALIPER
1. Depress the brake pedal past its first inch of travel and hold it in this position using a brake pedal depressor (holding) tool. This is done to isolate
the master cylinder from the brake hydraulic system disallowing the brake fluid to completely drain out of the brake fluid reservoir.
2. Raise the vehicle.
3. Remove front wheel and tire assembly.
4. Remove the anti-rattle spring from the outboard side of the caliper and adapter.
