Sebring LX Convertible L4-2.4L VIN X (2002)
2. Install timing belt.
3. Connect negative battery cable.
Timing Belt
1. Set crankshaft sprocket to TDC by aligning the sprocket with the arrow on the oil pump housing.
Camshaft Sprocket Alignment
2. Set camshafts timing marks so that the exhaust camshaft sprocket is a 1/2 notch below the intake camshaft sprocket (Fig. 109).
CAUTION: Ensure that the arrows on both camshaft sprockets are facing up.
Timing Belt Alignment (1 Of 2)
Timing Belt Alignment (2 0f 2)
3. Install timing belt. Starting at the crankshaft, go around the water pump sprocket, idler pulley, camshaft sprockets and then around the tensioner
(Fig. 110).
4. Move the exhaust camshaft sprocket counterclockwise (Fig. 110) to align marks and take up belt slack.
