Sebring LX Convertible L4-2.4L VIN X (2002)
Blower Motor Resistor: Service and Repair
REMOVAL
1. Remove lower right silencer panel.
Fig.26 Resistor Block
2. Disconnect wiring connectors from resistor.
3. Remove blower resistor mounting screws.
4. Pull blower motor resistor out of HVAC housing.
INSTALLATION
1. Install blower resistor into HVAC housing.
2. Install and tighten the two resistor mounting screws.
3. Connect resistor wiring harness.
4. Install right silencer panel.
