Sebring LX Convertible L4-2.4L VIN X (2002)
Fig.10 Evaporator Coil
9. Lift evaporator out of bottom housing.
10. Remove styrofoam seal around evaporator.
INSTALLATION
1. Install evaporator coil into lower housing.
2. Install evaporator temperature sensor, refer to Evaporator Temperature Sensor/Service and Repair. See: Evaporator Temperature Sensor /
Switch/Service and Repair
3. Install upper housing onto lower housing and install screws, refer to Housing Assembly HVAC/Service and Repair. See: Housing Assembly
HVAC/Service and Repair
4. Connect recirculation motor connector.
5. Install evaporator seal.
6. Install HVAC harness on upper housing.
7. Install HVAC housing in vehicle, refer to Housing Assembly HVAC/Service and Repair. See: Housing Assembly HVAC/Service and Repair
