Sebring LX Convertible L4-2.4L VIN X (2002)
Crankshaft And Camshaft Timing (2 Of 2)
7. Rotate the crankshaft CLOCKWISE two complete revolutions manually for seating of the belt, until the crankshaft is repositioned at the TDC
position. Verify that the camshaft and crankshaft timing marks are in proper position (Fig. 112).
8. Check if the spring tang is within the tolerance window (Fig. 113). If the spring tang is within the tolerance window, the installation process is
complete and nothing further is required. If the spring tang is not within the tolerance window, repeat Steps 5 through 7.
9. Install engine mount support bracket (Fig. 100).
10. Install upper timing belt cover. Torque fasteners to 6 Nm (50 in. lbs.) (Fig. 100).
11. Install the lower timing belt cover. Torque fasteners to 6 Nm (50 in. lbs.) (Fig. 100).
12. Install generator and bracket. Connect generator connections.
13. Install AC/Generator belt tensioner.
14. Install crankshaft damper.
15. Install right engine mount.
16. Install coolant recovery container.
17. Install accessory drive belts.
18. Install belt splash shield.
19. Install right front wheel.
20. Connect negative battery cable.
