Sebring LX Convertible L4-2.4L VIN X (2002)
14. Remove screws fastening steering gear heat shield to crossmember.
15. Remove screws fastening power steering pressure hose to crossmember.
16. Remove brake tube routing bracket from left lower control arm rear mounting bolt.
17. Disconnect fuel tube bundle routing support above crossmember.
18. Position transmission jack under center of front suspension crossmember to support it.
19. On each side of the vehicle, remove the 2 bolts attaching the front and rear of the front suspension crossmember to the frame rails of vehicle.
20. Using transmission jack, lower front suspension crossmember enough to allow steering gear to be removed from crossmember. When lowering
front suspension crossmember, do not let crossmember hang from lower control arms, weight of crossmember must be supported by the
transmission jack.
