Sebring LX Convertible L4-2.4L VIN X (2002)
12. Remove the 4 bolts attaching rear suspension crossmember to rear frame rails.
CAUTION: When lowering rear suspension crossmember do not put a strain on the rear brake flex hoses.
13. Lower the rear suspension crossmember far enough to access the upper control arm pivot bar to crossmember attaching bolts.
14. Remove the 2 bolts attaching the upper control arm to the rear suspension crossmember.
15. Remove the upper control arm from the rear suspension crossmember.
16. Transfer any required components to the replacement control arm.
DISASSEMBLY - UPPER BALL JOINT
The rear upper control arm must be removed from the vehicle for replacement of the ball joint.
