Sebring LX Convertible L4-2.4L VIN X (2002)
6. Separate the trailing link from the hanger bracket. To separate trailing link from hanger bracket, use a large adjustable wrench on flat of trailing
link to turn link while holding nut stationary.
INSTALLATION
CAUTION: The inner and outer trailing link to hanger bracket bushings and retainers must be installed in their correct position on the trailing link. Do
not reverse the position of the inner and outer trailing link bushing or retainers on the trailing link.
NOTE: When installing trailing link into hanger bracket, the flat on the trailing link must be positioned at the hanger bracket.
1. Install the (black) inner bushing retainer, and inner bushing on the trailing link. Install the trailing link, retainer and bushing on the hanger bracket.
Then install the outer bushing, (gold) outer bushing retainer and nut on the trailing link. Using a large adjustable wrench on flat of trailing link to
keep it from rotating, tighten the trailing link retaining nut to a torque of 99 Nm (73 ft. lbs.).
2. Install the (black) inner bushing retainer, and inner bushing on the trailing link.
