Sebring LX Convertible L4-2.4L VIN X (2002)
Power Window Relay: Service and Repair
WINDOW DROP RELAY
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove door trim panel.
3. Peel back the waterdam to expose the window drop relay.
4. Disconnect the wire harness connector.
5. Remove the window drop relay from the door panel.
INSTALLATION
1. Install the window drop relay to the door panel.
2. Connect the wire harness connector.
3. Place the waterdam into position on the door panel,
4. Install door trim panel.
5. Connect the battery negative cable.
