Sebring LX Coupe V6-3.0L VIN H (2002)
CAUTION: Attach the cylinder head bolt washer in the direction shown in the illustration.
2. Using special tool MD998051 and a torque wrench, tighten the bolts to the specified torque in the order shown in the illustration. (in two or
three steps)
Tightening torque: 108 ± 5 Nm (80 ± 3 ft. lbs.)
3. Loosen the mounting bolts in the reverse sequence to that shown.
4. Tighten the mounting bolts progressively in the shown sequence to the specified torque again.
Tightening torque: 108 ± 5 Nm (80 ± 3 ft. lbs.)