Sebring LX Coupe V6-3.0L VIN H (2002)
STEP 1. Check the ambient temperature sensor connector A-29 for damage
Q: Is the ambient temperature sensor connector A-29 in good condition?
YES: Go to Step 2.
NO: Repair or replace it. Refer to Harness Connector Inspection.
STEP 2. Check the harness wires between ambient temperature sensor connector A-29 and multi-center display connector C-08.
NOTE: After checking intermediate connector C-209, check the wires. If intermediate connector C-209 is damaged, repair or replace it. Refer to
Harness Connector Inspection.
Q: Is the harness wires between ambient temperature sensor connector A-29 and multi-center display connector C-08 in good condition?
YES: Go to Step 3.
NO: Repair them. The multi-center display should work normally.
