Sebring LX Coupe V6-3.0L VIN H (2002)
CAUTION: Do not apply pressure to wheel bearing by the vehicle weight to avoid possible damage when drive shaft nut is loosened.
<< B >>
TIE ROD END DISCONNECTION
CAUTION Do not remove nut from ball joint but loosen it and use special tools instead to avoid possible damage to ball joint threads.
Hang special tools with ropes to prevent them from failing.
INSTALLATION SERVICE POINT
>> A <<
DRIVE SHAFT NUT INSTALLATION
CAUTION: Do not apply pressure to wheel bearing by the vehicle weight to avoid possible damage when castle nut is loosened.
1. Direct the flat side of a washer to a drive shaft nut to install.
2. Tighten driveshaft nut fully with special tools.
