Sebring LX Coupe V6-3.0L VIN H (2002)
Fuel Tank Pressure Sensor: Testing and Inspection
FUEL TANK DIFFERENTIAL PRESSURE SENSOR CHECK
1. Disconnect the fuel tank differential pressure sensor connector and connect special tool MB991348 between the terminals of the disconnected
connector.
2. Turn the ignition switch to "ON" and measure the output voltage between terminals 2 and 3.
Standard value: 2.0 - 3.0 V
NOTE: To inspect the sensor, refer to Powertrain Management / Computers and Control Systems / Testing / Trouble Code Descriptions / Diagnostic
Trouble Code Chart.
To inspect the sensor, refer to Powertrain Management / Computers and Control Systems / Testing / Trouble Code Descriptions / Diagnostic Trouble
Code Chart.
