chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Information Bus|Testing and Inspection > < Information Bus|Description and Operation|Page 1662
Page 4
background image

NOTE:  Interior lights and rear personal light are controlled, only when switch position is set to the position "door controlled operation"

Interior Light Dimming function
-

When a door is opened from outside or inside [with the ignition switch turned to "LOCK" (OFF)]:  When a door is opened, the ETACS-ECU
causes the interior lights to be illuminated at 100% intensity. When the door is closed, it dims the interior lights to 60% intensity and
approximately 30 seconds later, turns out the light completely. During this period (timer controlled period), the interior lights goes out if the
ignition switch is turned "ON" or the doors are locked.

-

When a door is opened or closed with the ignition switch in the "ON" position:  The interior lights illuminate at 100% intensity when a door is
opened and turned out when it is closed.

-

When no door is opened and the ignition key is removed: The interior lights are illuminated at 100% intensity and turned off approximately 30
seconds
 later. During that time (timer-controlled period), the interior lights goes out if the ignition key is inserted and turned to "ON" or the door
locking system is activated.

Keyless Entry Room Lamp Answerback

Interior lights's answerback operation in response to door lock control by keyless entry system:  To allow the driver to confirm the doors have
locked by the keyless entry system, the ETACS-ECU causes the interior lights to blink twice when the doors are locked by the RKE system and to
illuminate for approximately 30 seconds when the doors are locked. The interior lights's answerback operation in response to a keyless entry
system control action is accompanied by flashing of the hazard warning lights.

Interior Light Automatic Shut-off Function

This function prevents the battery from being discharged when the door is open or the interior lights (dome light and rear personal lights and foot
lights and truck light) remains on with the ignition switch at the "LOCK" (OFF) position. The ETACS-ECU turns on its "keep" relay to switch off
the battery power supply to the interior lights when the interior light loaded signal, driver's or passenger's door switches or, trunk lid latch switch
remain on for approximately 30 minutes with the ignition switch ACC signal is OFF. Then the interior lights will be switched off. If the ignition
switch is turned on again, the ETACS-ECU turns on its "keep" relay to illuminate the interior lights.

THEFT-ALARM SYSTEM

Theft-alarm System Operation

If a door or hood is opened, when the theft-alarm system has been armed the horn (theft-alarm horn) will sound and headlights flash (high-beam)
intermittently for a period of 180 seconds.

Panic Alarm Function

With the theft-alarm function armed, pressing the panic button on the keyless entry system transmitter causes the horn (theft-alarm horn and horn)
to sound for about 180 seconds in an attempt to prevent theft. The alarm is turned off by pressing any switch on the transmitter.

Information Bus|Testing and Inspection > < Information Bus|Description and Operation|Page 1662