Sebring LX Coupe V6-3.0L VIN H (2002)
STEP 2. Check the wiring harness from ETACS-ECU connector C-318 (terminal 59) to column switch connector C-203 (terminal 3),
front-ECU
connector A-11X (terminal 22) and sunroof motor assembly connector D-08 (terminal 10).
NOTE: Also check intermediate connectors C-28 and C-209 and joint connector C-141 for loose, corroded, or damaged terminals, or terminals pushed
back in the connector. If intermediate connectors C-28 and C-209 and joint connector C-141 are damaged, repair or replace the damaged components) as
described in Harness Connector Inspection. See: Diagrams
Q: Are the wiring harness from ETACS-ECU connector C-318 (terminal 59) to column switch connector C-203 (terminal 3), front-ECU connector
A-11X (terminal 22) and sunroof motor assembly connector D-08 (terminal 10) in good condition?
YES : Go to Step 3.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Confirm the DTC 21 is not displayed.
