chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 1710 > < Component Tests and General Diagnostics|Page 1708
Page 45
background image

Connectors

INSPECTION PROCEDURE C-1: Central Door Locking System: Central door locking system does not operate.

CIRCUIT OPERATION  

-

The ETACS-ECU operates the door lock actuators through its dedicated relay (integrated in the ETACS-ECU).

-

The ETACS-ECU drives the relay to lock or unlock the door if the requirements are satisfied.

TECHNICAL DESCRIPTION (COMMENT)

The power supply circuit, the circuit shared by door lock actuators, or the ETACS-ECU may be defective.

TROUBLESHOOTING HINTS

-

The ETACS-ECU may be defective.

-

The wiring harness or connectors may have loose, corroded or   damaged terminals, or terminals pushed back in the connector.

DIAGNOSIS  
Required Special Tool:  

-

MB991223: Harness Set

Component Tests and General Diagnostics|Page 1710 > < Component Tests and General Diagnostics|Page 1708