Sebring LX Coupe V6-3.0L VIN H (2002)
STEP 5. Check the wiring harness between ETACS-ECU connector C-317 (terminal 22) and C-319 (terminal 12) and driver's door lock
actuator
connector E-13 (terminals 4 and 6).
NOTE: Also check intermediate connector C-211 and junction block connector C-308 for loose, corroded, or damaged terminals, or terminals pushed
back in the connector. If intermediate connector C-211 or junction block connector C-308 is damaged, repair or replace the damaged components) as
described in Harness Connector Inspection?.
Q: Is the wiring harness from ETACS-ECU connectors C-317 (terminal 22) and C-319 (terminal 12) to driver's door lock actuator connector E-13
(terminals 4 and 6) in good condition?
YES : Replace the ETACS-ECU. Verify that the central door locking system works normally.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair or replace the damaged component(s). Verify that the central door locking system works normally.
Inspection Procedure C-2
INSPECTION PROCEDURE C-2: Central Door Locking System: Some doors do not lock or unlock.
