Sebring LX Coupe V6-3.0L VIN H (2002)
NOTE: Also check intermediate connector C-213 and junction block connector C-308 for loose, corroded, or damaged terminals, or terminals pushed
back in the connector. If intermediate connector C-213 or junction block connector C-308 is damaged, repair or replace the damaged components) as
described in Harness Connector Inspection?.
Q: Is the wiring harness from ETACS-ECU connectors C-31 (terminals 12 and 13) to driver's door lock actuator connector E-07 (terminals 4 and 6) in
good condition?
YES : Replace the ETACS-ECU. Check that all the doors can be locked and unlocked normally.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the central door locking system works normally.
Inspection Procedure C-3
INSPECTION PROCEDURE C-3: Central Door Locking System: All the doors do not lock or unlock with just the door lock switch operation.
TECHNICAL DESCRIPTION (COMMENT)
The door lock switch (built into the power window switch) or the ETACS-ECU may be defective.
