Sebring LX Coupe V6-3.0L VIN H (2002)
STEP 3. Check the wiring harness between power window main switch connector E-12 (terminals 1 and 5) and front power window motor
(LH)
connector E-11 (terminals 1 and 2).
Q: Is the wiring harness between power window main switch connector E-12 (terminals 1 and 5) and front power window motor (LH) connector E-11
(terminals 1 and 2) in good condition?
YES : Replace the power window main switch. Check that the power window (LH) function normally.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back In the
connector. Repair the wiring harness as necessary. The power window (LH) function should work now normally.
Inspection Procedure D-4
INSPECTION PROCEDURE D-4: Power Window Relay: Power window do not work normally by operating the passenger's power window
sub switch.
