Sebring LX Coupe V6-3.0L VIN H (2002)
STEP 3. Check the power window sub-switch continuity.
1. Remove the power window sub-switch. (Refer to Door Trim.)
2. Check continuity when the power window sub-switch is operated to "UP" or "DOWN" position.
Q: Is the power window sub-switch in good condition?
YES : Go to Step 4.
NO : Replace the power window sub-switch. The passenger's power window function should work now normally.
STEP 4. Check the power window motor (RH) operation.
1. Remove the power window regulator (RH). (Refer to Door Glass and Regulator.)
2. Follow the table below to check the power window motor (RH) for correct operation.
Q: Is the power window motor (RH) in good condition?
YES : Go to Step 5.
NO : Replace the power regulator assembly (RH). The passenger's power window function should work now normally.
STEP 5. Check the battery power supply circuit to the power window sub-switch. Test at power window sub-switch connector E-05.
1. Disconnect power window sub-switch connector E-05 and measure the voltage available at the harness side of the connector.
