Sebring LX Coupe V6-3.0L VIN H (2002)
NOTE: Also check intermediate connectors C-211 and C-213 for loose, corroded or damaged terminals, or terminals pushed back in the connectors. If
intermediate connector C-211 or C-213 is damaged, repair or replace the damaged components) as described in Harness Connector Inspection.
Q: Is the wiring harness between power window main switch connector E-12 (terminal 7) and power sub-switch connector E-05 (terminal 8) in good
condition?
YES : Replace the power window main switch. When the power window sub-switch is operated, the passenger's power window should open or
close normally.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The passenger's power window function should work now normally.
STEP 14. Check power window sub-switch connector E-05 and power window motor (RH) connector E-04 for loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Q: Are power window sub-switch connector E-05 and power window motor (RH) connector E-04 in good condition?
YES : Go to Step 15.
