chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 1767 > < Component Tests and General Diagnostics|Page 1765
Page 102
background image

Connectors

CIRCUIT OPERATION  
If trunk lid opener signal is input from transmitter, ETACS-ECU makes trunk lid opener actuator open the trunk lid.

TECHNICAL DESCRIPTION (COMMENT)

If door lock or unlock operation is correctly done by the transmitter, the cause is a malfunction of trunk lid opener actuator or ETACS-ECU.

TROUBLESHOOTING HINTS

-

The trunk lid opener actuator may be defective.

-

The transmitter may be defective.

-

The ETACS-ECU may be defective.

-

The wiring harness or connectors may have loose, corroded or damaged terminals, or terminals pushed back in the connector.

DIAGNOSIS  
Required Special Tools:

-

MB991223: Test Harness Set

-

MB991502: Scan Tool (MUT-II)

-

MB991529: Diagnostic Trouble Code Check Harness

STEP 1. Check the keyless entry system operation (door lock and unlock operation).

Q: Does the keyless entry system door lock and unlock operation work normally?

YES :  Go to Step 2 <when using scan tool MB991502> or Step 3 <when using a voltmeter>. 

NO :  Solve the problem first. Refer to Inspection Procedure E-1 "Keyless entry system does not operate."

STEP 2. Check the input signal (by using scan tool MB991502).

Component Tests and General Diagnostics|Page 1767 > < Component Tests and General Diagnostics|Page 1765